Dear all, I was giving Parrot a try but just can’t get the AWUS036ACH USB adapter work in VMWare.
Just installed Parrot normally and updated to the newest packages.
Even though I have some Linux experience, I just seem to miss something to get this done. Any help is appreciated.
VMWare is configured to use the USB 3.0 controller.
The adapter is connected by USB 3.0 directly on the mainboard.
It just works fine with Windows. It also works fine when I boot up Parrot into the live environment directly on the hardware (Not in VMWare).
I installed the aircrack drivers
and also tried this one
But all I get after passing the USB device through is this:
[ 2078.224125] RTW: rtw_wdev_free(wdev=00000000385028b1) [ 2078.224126] RTW: rtw_wiphy_free(phy15) [ 2078.224131] RTW: rtw_usb_primary_adapter_deinit((null)) [ 2078.224131] RTW: rtw_dev_unload: bup==_FALSE [ 2078.224134] RTW: +r871xu_dev_remove, hw_init_completed=0 [ 2078.224198] RTW: WARN free_recv_skb_queue not empty, 8 [ 2078.224207] RTW: usb attached..., try to reset usb device [ 2078.540638] usb 3-2: reset high-speed USB device number 20 using xhci_hcd [ 2083.972707] usb 3-2: device descriptor read/64, error -110 [ 2099.844832] usb 3-2: device descriptor read/64, error -110 [ 2100.264622] usb 3-2: reset high-speed USB device number 20 using xhci_hcd
Bus 003 Device 000: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter
cfg80211 823296 1 88XXau
It jsut drives me crazy. Any ideas?
Thank you in advance